法国POWERSONIC蓄电池PS-12260船舶航海仪器12V26AH监测设备
采用紧装配技术,具有优良的高率放电性能。
采用特殊的设计,电池在使用过程中电液量几乎不会减少,使用寿命期间完全无需加水。
采用独特的耐腐蚀板栅合金、使用寿命长。
采用气体再化合技术,电池具有极高的密封反应效率,无酸雾析出,安全环保,无污染。
采用特殊的设计和高可靠的密封技术,确保电池密封,使用安全、可靠
How to connect a battery inSeries?
The positive terminal of the first battery is connected tothe negative terminal of the second battery, the positive terminalof the second is connected to the negative of the third, etc. Thevoltage of the assembled battery is the sum of the battery voltagesof the individual batteries. So the batteries are connected: + to -to + to - to + to -, etc. The capacity of the battery isunchanged.
How to connect a battery inParallel?
The positive terminal of the first battery is connected tothe positive terminal of the second battery, the positive terminalof the second is connected to the positive of the third, etc. andThe negative terminal of the first battery is connected to thenegative terminal of the second battery, the negative terminal ofthe second is connected to the negative of the third, etc. So thebatteries are connected: + to + to + and - to - to -. In thisconfiguration, the capacity is the sum of the capacities of theindividual batteries and voltage is unchanged. For example, if youtake 5 6V 10AH batteries and connect the batteries in series, youwould end up with a battery array that is 30 Volts and 10AH. If youconnect the batteries in parallel, you would end up with a batteryarray that is 6 Volts and 50AH. By the way, this is how ordinaryauto batteries are made. 6 2volt cells are put in series to give12v battery and the 6 cells are just enclosed in one case. Manyni-cad batteries are done the same way.
技术特色(TECHNICAFEATURES)
密闭结构(SealedConstruction)
电解液悬浮系统(ElectrolyteSuspensionystem)
再组合(GasRecombination)
使用免保养(Maintenance-FreeOperation)
任何方向可使用(OperationInAnyPosition)
低压力排气系统(LowPressureVenting2System)
高负荷格子体Heavy2DutyGrids)
低自行放电-长保存寿命(LowSelfDischarge-Lon2shelfLife)
宽广的温度使用范围(BroadOperating2TemperatureRange)